Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.
Techmar main cables, for connection to the transformer, have four 2 pin threaded connectors (SPT1 cable, 10m) or 6 connectors (SPT3 Cable, 15m) moulded along their length. Just push in the connector and screw tight for a secure, weatherproof joint. Techmar extension cables also have this connection system moulded at each end. A 3-way connector on 15cm cable is also available. Luxform "click-on" connectors may also be used with Techmar lights and cables as the SPT1 and SPT3 cables are the same on both systems. Just ensure that Techmar connector pins are not in contact with damp soil etc.
M6011 - This enables the outlet of a Techmar Transformer or cable to be split in 3 ways or directions. It consists of 1 inlet plug connected by 15cm of SPT 2 cable to the connector block of 3 Techmar outlets. All outlets have caps in case only one or two
M7011 - Main connection cable from the transformer to all Techmar lights up to a maximum of 120 watts. 4 moulded-in connectors. 10 metres of cable, first connector after 4 metres, then 3 more connectors at 2 metre intervals.
M8011 - Main connection cable from the transformer to all Techmar lights up to a maximum of 150 watts. 6 moulded-in connectors. 15 metres of cable, first connector after 5 metres, then 5 more connectors at 2 metre intervals.
M9011 - Timer and photocell. Set the number of hours you want the lights to stay on after dusk, or operate dusk to dawn. Fit outdoors between the Plug&Play transformer and the lights. 12v power in by 2m cable with transformer plug. 1 cable outlet for Plu
You Save: £2.00
You Save: £2.00
- «« Start
- « Prev
- Next »
- End »»
Results 1 - 9 of 9