The 13mm elbow is a push in fitting into the 13mm polytube for taking the tube round corners. 

Gets you round tight corners. (13mm - 1/2inch - black Polytube). 

Plugs end of 13mm tube. Particularly useful with Dripper and Microspray installations. We recommend that you fit a Garden Magic Ratchet Clamp. 

Joins 2 13mm tubes together to extend or repair Polytube. Also see: G14-Q Ratchet clamps. 

Pack of 4. Joins two 13mm tubes together to extend or repair Polytube. Also see: G14-Q Ratchet clamps. 

Very useful for spreading spike sprays and microsprays around the garden from one hose line. Fits 1/2inch (13mm) garden hose and black Polytube. 

Value pack of 10. Very useful for spreading spike sprays and microsprays around the garden from one hose line. Fits 1/2inch (13mm) garden hose and black Polytube. 

Converts your garden tap (3/4inch thread) to three outlets, each threaded the standard 3/4inch bsp and each with a tap. This means that you can fit one or two timers and still have one outlet free for your garden hose. 

Converts your garden tap (3/4inch thread) to 2 outlets, each with a tap and each threaded 3/4inch for timers or standard fittings . 

Pack of 10. Inserts into 13mm Polytube and connects 5mm tube to the 13mm tube 

Gets 5mm Polytube round tight corners. Available as a pack of 5. 

Enables one 5mm line to serve a number of pots or baskets. Also see: Drippers. 

Female click-on fiting which fits to the end of your 1/2inch (13mm) hose. 

Just push the barbed end into the black Polytube, secure with a ratchet clamp; then click-on your garden hoseline to connect your Garden Magic irrigation system to the garden hose. Also see: Click-on connectors, G14-Q Ratchet clamps. 

Used with click on hose connectors, enables two garden watering devices to be connected to the same hose. 

Screws on to metal spike bodies, Threaded Bases and Threaded Risers, to prevent ingress of dirt when not in use (i.e. over winter). 

Makes hole in the side of the 13mm Polytube to accept Barbed Joiners or 5mm Microspray Stems. Includes 6 plugs for sealing holes no longer needed. 

Hardened steel punch, very useful where a number of holes are to be punched or a level of comfort is required. 

G415 - This inline filter contains a nylon mesh cylinder fliter which should last for years but is also available as a spare part. 

This 5mm "micro tap" is useful to switch off individual drip lines. Supplied as a pack of 2. It is designed to work at low pressure. If used with mains water, a pressure regulator will normally be needed. 

Universal O Ring to suit Garden Magic and most other makes of click-on fittings. External fitting. 

Fits into hose connector GW10 and other standard click-on hose connectors, to join two hoses together. (pack of 2) 

This quality Claber pressure reducer fits your garden tap (1/2in or 3/4in) or the outlet of our water timers. Automatically reduces and maintains outlet water pressure at a constant pressure of 1 bar. 

Clamps 13mm (1/2inch ) elbows, tees and joiners to Polytube. Supplied in packs of 10. 

Clamps 20mm elbows, tees and joiners to Polytube. Supplied in packs of 10. 

Clamps 13mm elbows, tees and joiners to Polytube. Supplied in packs of 10. 

Tank Outlet 3/4" bsp - This enables you to connect one tank or waterbutt to another. 27mm hole required to be drilled. Supplied with back-nut & washer. Our tap connector fits this outlet to enable 13mm (1/2") Polytube or hosepipe to be connected. 

Screws onto your garden tap, or timer outlet, to accept hose or Polytube. Fits standard garden tap (Threaded 3/4" bsp) 

Screws onto your garden tap, or timer outlet, to connect 5mm Polytube ("Micro-tube") for drippers. Fits standard garden tap (Threaded 3/4" bsp) 

Enables your 3/4inch or 1/2inch threaded garden tap to accept click-on fittings. Colour is Green and Black 

These fit a standard 3/4 inch garden tap. They accept standard hose connectors. 

Tee & End Bases are essential for connecting (a) Lawn Pop-ups, (b) Greenhouse Misters and (c) for buried watering systems (see 13mm Height Extension Tubes). Complete with sealing washer. 

Tee & End Bases are essential for connecting (a) Lawn Pop-ups, (b) Greenhouse Misters and (c) for buried watering systems (see 13mm Height Extension Tubes). Complete with sealing washer. 

Useful spare part. Seals the connection between the Metal Spike Base and the spray head. (also fitted to the Threaded Tee and End Bases)