Applying Polytube

Fitting Polytube to elbows, Tees, Joiners and 13mm sprays.  A good tip here is to soften the end of the Polytube in a mug/thermos of hot/boiling water for 10 seconds. In the same way, assemble Microsprays into the ends of the 5mm stems (risers) prior to insertion into the 13mm Polytube supply line.   

How to fit 5mm Polytube to the 13mm tube:-

  1. Pierce a hole in the side of the 13mm tube near the pot or plant, using the Garden Magic Hole punch (this comes with 20 plugs to plug unwanted holes).
  2. Insert a 5mm Barbed Joiner.  This is a double ended straight connector with a small flange in the middle to stop you pushing it in too far.
  3. Then push the 5mm tube over the free end of this connector - and your connection is made !