Claber Logica Plus Timer and Rain sensor

Fix the sensor to your wall or fence and plug it into the socket in the timer and job done in just a few minutes.  This special offer combines our user friendly Logica timer with the rain sensor designed for it (and the 2-outlet timer).The sensor stops your system watering after a period of rain (5mm of rain needs to fall)  until most of this has evaporated.

The way it works is that rainwater collects in the sensor's chamber and a magnetic float starts to rise.  It has to rise by 5mm before it disconnects the signal to start watering.  The float is porous and evaporates water at the same rate as the soil in your garden.  Once the water level in its chamber falls below 5mm, it reconnects the signal and watering commences at the times that you have set.

This user-friendly timer is set by turning a knob to any one of 15 pre-set cycles.  All these programs are conveniently summarised on the inside of the cover. Our rain sensor may be fitted by simply plugging into the socket provided. 

Needs 9 volt battery (not included).

The timer will be damaged by frosts - keep indoors all winter. Don't use until all danger of frosts has passed (usually 1st week of May). 

Product Code: Prom 3

Programs are as follows:-

You may also be interested in this/these product(s)

b) Watering timer, 2 Independent Outlets (incl. 9v battery) £87.00 £77.00 You Save: £10.00

c) Claber Logica Plus watering timer (incl. 9v battery) £32.00