Polytube 13mm X 50 metres
|
Use as a supply line for Microsprays, Drip Watering and Spikesprays. Also compatible with other leading brands. |
|
| The inside diameter is 13mm (about 1/2"). Maximum Water Flow Rate: 30 litres per minute Suggested Maximum Length: 50 metres |
|
|
Note: 13mm Polytube is designed to operate at pressures up to 200 KPa (30 psi) which is the operating pressure to be expected in typical garden watering system. It is not designed to operate at full mains pressure, say 600 KPa, which is the pressure that can be generated when no water is flowing. Therefore, 13mm Polytube should not be used with a stop tap in the line . Instead, turn the water off at the tap so the pressure in the Polytube never builds up to full mains pressure. Of course if there are sprays/pressure reducer before the in-line tap then these will dissipate the pressure. |
Ask a question about this product
Price:
£37.00
Availability
In Stock: 102
Usually ships in:
You may also be interested in this/these product(s)
Claber Watering timer, 2 Independent Outlets (incl. 9v battery)
£87.00 £77.00 You Save: £10.00 |
a. SD212 Watering Timer, Easy to set (incl. 9v battery)
£32.00 |
1 pack: 5mm Microsprays half circle (pack of 10)
£4.00 |
Metal Spike Spray, Barbed - Tee, 1/2 Circle (13mm)
£12.00 |
Recently Viewed Products
- Polytube 13mm X 100 metres (Category: Hoses)
- Polytube 5mm X 20 metres (Category: Hoses)
- Polytube 5mm X 10 metres (Category: Hoses)
- Pack of 1 spike spray Full Circle Adj.+ 200mm Extension Tube (Category: Height Extension)
