Polytube 5mm X 10 metres
| This micro-bore flexible Polytubing is used as a feeder line for Drippers, and Microsprays. 10 metre coil. |
| Actually, there is no dimension of 5mm on this tubing at all. The inside diameter is 4mm and the outside diameter is 6mm, the name just stuck. Maximum Water Flow Rate: 2 litres per minute Suggested Maximum Length for a single run: 10 metres |
How to fit 5mm Polytube to the 13mm tube:-
- Pierce a hole in the side of the 13mm tube near the pot or plant, using the Garden Magic Hole punch (this comes with 20 plugs to plug unwanted holes).
- Insert a 5mm Barbed Joiner. This is a double ended straight connector with a small flange in the middle to stop you pushing it in too far.
- Then push the 5mm tube over the free end of this connector - and your connection is made !
Ask a question about this product
Price:
£6.00
Availability
In Stock: 91
Usually ships in:
You may also be interested in this/these product(s)
Click-on Barb, 13mm (1/2 inch)
£2.50 |
Polytube 13mm X 15 metres
£14.00 |
13mm Joiner (each)
£1.00 |
Tap connector 13mm hose or tube to garden tap.
£2.50 |
